---
title: "GE range error code F97"
description: "GE range error code F97: An internal component needs to be replaced — the same wording GE gives F96 and F7X."
url: "https://gemiami.support/error-codes/range-f97/"
date_modified: "2026-08-31"
Appliance type: "Ranges, Wall ovens"
---


# GE range error code F97

### What F97 means, in the maker’s own words

An internal component needs to be replaced — the same wording GE gives F96 and F7X.

### Where this code actually appears

On the control panel, and usually with a sound. GE describes their refrigerator codes as flashing green on the display and typically accompanied by a beeping, and the range, microwave and dishwasher tables all describe codes you can read from the front of the appliance. That is the opposite of some makes, where the number is written into a hidden log and never shown — here, if something is wrong, the appliance generally tells you. Photograph what it says before cutting the power, because a reset erases it and the code is most of the diagnosis.

### Which machines this one applies to

GE lists F96, F97 and F7X with the same meaning. GE says plainly on their own range and oven table that they cannot list every code for every model past and present, so a code missing from their table is not proof that your appliance cannot raise it — and a code in it is not proof that yours can. The model number settles it.

### What to do about it

- Treat it as F96: reset once to establish persistence, note the circumstances, then measure.
- Do not accept a part quoted from this code alone. It does not name one.

### Where this goes next

The job this usually becomes is [diagnostic visit](/services/diagnostic-visit/), and every one of those pages carries a starting figure and the reasons that move it. If it turns out to be nothing — and on this make a real share of these are modes rather than problems — the visit ends there and you pay the diagnostic and nothing else, or call [(305) 306-2503](tel:+13053062503) and describe what the display is doing before booking anything.

GE lists F96, F97 and F7X with the same meaning

What this one means

What F97 means, in the maker’s own words

An internal component needs to be replaced — the same wording GE gives F96 and F7X.

Where this code actually appears

On the control panel, and usually with a sound. GE describes their refrigerator codes as flashing green on the display and typically accompanied by a beeping, and the range, microwave and dishwasher tables all describe codes you can read from the front of the appliance. That is the opposite of some makes, where the number is written into a hidden log and never shown — here, if something is wrong, the appliance generally tells you. Photograph what it says before cutting the power, because a reset erases it and the code is most of the diagnosis.

Which machines this one applies to

GE lists F96, F97 and F7X with the same meaning. GE says plainly on their own range and oven table that they cannot list every code for every model past and present, so a code missing from their table is not proof that your appliance cannot raise it — and a code in it is not proof that yours can. The model number settles it.

What to do about it

Treat it as F96: reset once to establish persistence, note the circumstances, then measure.

Do not accept a part quoted from this code alone. It does not name one.

Where this goes next

The job this usually becomes is diagnostic visit, and every one of those pages carries a starting figure and the reasons that move it. If it turns out to be nothing — and on this make a real share of these are modes rather than problems — the visit ends there and you pay the diagnostic and nothing else, or call [(305) 306-2503](tel:+13053062503) and describe what the display is doing before booking anything.

---

**[Read full article: GE range error code F97](https://gemiami.support/error-codes/range-f97/)**