---
title: "Washer drain pump repair"
description: "GE washer drain pump repair: it fills and washes but will not drain. The filter in front of the pump is where the story usually ends — coins, drawstrings, an…"
url: "https://gemiami.support/services/washer-drain-pump-replacement/"
date_modified: "2026-08-31"
Appliance type: "Washers"
---


# GE washer drain pump repair

What this involves

The filter before the pump, every time

Slow draining is restriction, not failure

The hose and the standpipe count as the drain

Open the pump filter

On most GE machines this is accessible, and what comes out of it explains the symptom more often than any test does.

Check the hose and the standpipe

A kinked hose behind the machine and a blocked house standpipe both look like a dead pump from the front.

Test the pump itself

Current and rotation, with the filter clear, so that a replacement is a decision rather than a guess.

Replace and run a drain cycle

Watching the discharge rate rather than just confirming that water leaves.

When GE washer pump replacement is the answer

After the filter, the hose and the standpipe are clear and the pump has still failed its test. Before that, it is a restriction rather than a pump.

The discharge rate, watched

Not just that water leaves, but how fast. A pump that drains slowly after a repair is a pump fighting something that is still there.

---

**[Read full article: Washer drain pump repair](https://gemiami.support/services/washer-drain-pump-replacement/)**