Error code
GE oven error code F6 240 Volt
GE oven error code F6 240 Volt: High cavity temperature detected on a 240 Volt Advantium. Which machines can actually raise it, where the number lives on this make, and what to do next.
- From $95 diagnostic, credited to the repair
- 59 cities and neighborhoods covered
- OEM parts available on order
- In writing the price, before anything is opened
What we can confirm
Code F6 240 Volt, from the manufacturer's own documentation
A code is only meaningful together with the machine showing it — the same digits mean different things on different equipment.
The code
F6 240 Volt
High cavity temperature detected on a 240 Volt Advantium. The oven has seen a cavity hotter than it accepts and has stopped, which is protection rather than failure.
or call (305) 306-2503
What it narrows down to
High cavity temperature detected on a 240 Volt
Diagnostic
From $95, credited to the repair
On the same appliance
What else belongs to the wall ovens
On this make a code belongs to the appliance rather than to a product line. These are the other conditions this machine can display, and the models that can show this one — a display often has more than one thing to say, and the model number decides what any of it costs to put right.
Other codes this appliance can display
For an unknown reason the oven temperature has
The oven sensor needs to be replaced. F3
The oven sensor needs to be replaced —
The electronic control needs to be replaced, and
The electronic control needs to be replaced —
An issue with the upper cooling fan circuit,
The same digits mean different things on different equipment. Search the full code list
In more detail
About GE oven error code F6 240 Volt
What F6 240 Volt means, in the maker's own words
High cavity temperature detected on a 240 Volt Advantium. The oven has seen a cavity hotter than it accepts and has stopped, which is protection rather than failure.
Where this code actually appears
On the control panel, and usually with a sound. GE describes their refrigerator codes as flashing green on the display and typically accompanied by a beeping, and the range, microwave and dishwasher tables all describe codes you can read from the front of the appliance. That is the opposite of some makes, where the number is written into a hidden log and never shown — here, if something is wrong, the appliance generally tells you. Photograph what it says before cutting the power, because a reset erases it and the code is most of the diagnosis.
Which machines this one applies to
240 Volt Advantium only. GE says plainly on their own range and oven table that they cannot list every code for every model past and present, so a code missing from their table is not proof that your appliance cannot raise it — and a code in it is not proof that yours can. The model number settles it.
What to do about it
- Let it cool completely before clearing.
- Check that the ventilation around the appliance is not obstructed — these are usually built in, and clearance is part of the installation.
- Clear, reprogram, and power-cycle if it returns.
Where this goes next
The job this usually becomes is diagnostic visit, and every one of those pages carries a starting figure and the reasons that move it. If it turns out to be nothing — and on this make a real share of these are modes rather than problems — the visit ends there and you pay the diagnostic and nothing else, or call (305) 306-2503 and describe what the display is doing before booking anything.
This article is based on:
- Official manufacturer documentation
- Internal repair procedures
- Technician repair history
- Company quality standards