Error code
GE range error code Bad Line
GE range error code Bad Line: Not a repair. GE's table says it plainly: power is applied to the unit but it has not been wired correctly. Which machines can actually raise it, where the number lives on this make, and what to do next.
- From $95 diagnostic, credited to the repair
- 59 cities and neighborhoods covered
- OEM parts available on order
- In writing the price, before anything is opened
What we can confirm
Code Bad Line, from the manufacturer's own documentation
A code is only meaningful together with the machine showing it — the same digits mean different things on different equipment.
The code
Bad Line
Not a repair. GE's table says it plainly: power is applied to the unit but it has not been wired correctly. The appliance is reporting an installation problem, and it will work normally once the wiring is right.
or call (305) 306-2503
What it narrows down to
Not a repair. GE's table says it plainly:
Diagnostic
From $95, credited to the repair
On the same appliance
What else belongs to the ranges
On this make a code belongs to the appliance rather than to a product line. These are the other conditions this machine can display, and the models that can show this one — a display often has more than one thing to say, and the model number decides what any of it costs to put right.
Other codes this appliance can display
For an unknown reason the oven temperature has
The oven sensor needs to be replaced. F3
The oven sensor needs to be replaced —
The electronic control needs to be replaced, and
The electronic control needs to be replaced —
An issue with the upper cooling fan circuit,
The same digits mean different things on different equipment. Search the full code list
In more detail
About GE range error code Bad Line
What Bad Line means, in the maker's own words
Not a repair. GE's table says it plainly: power is applied to the unit but it has not been wired correctly. The appliance is reporting an installation problem, and it will work normally once the wiring is right.
Where this code actually appears
On the control panel, and usually with a sound. GE describes their refrigerator codes as flashing green on the display and typically accompanied by a beeping, and the range, microwave and dishwasher tables all describe codes you can read from the front of the appliance. That is the opposite of some makes, where the number is written into a hidden log and never shown — here, if something is wrong, the appliance generally tells you. Photograph what it says before cutting the power, because a reset erases it and the code is most of the diagnosis.
What to do about it
- Do not book an appliance repair for this one. GE's own instruction is to contact an installer or an electrician to correct the mis-wire.
- It most often appears immediately after installation or after work on the panel.
- Once the wiring is corrected the oven functions normally — nothing inside it has failed.
Where this goes next
The job this usually becomes is diagnostic visit, and every one of those pages carries a starting figure and the reasons that move it. If it turns out to be nothing — and on this make a real share of these are modes rather than problems — the visit ends there and you pay the diagnostic and nothing else, or call (305) 306-2503 and describe what the display is doing before booking anything.
This article is based on:
- Official manufacturer documentation
- Internal repair procedures
- Technician repair history
- Company quality standards