Repair cost
GE gas range igniter and burner repair cost
What gas range igniter and burner repair costs on a GE in South Florida, from $175, and what moves that number. No final price is published anywhere on this site: the figure is confirmed on site after the diagnostic and agreed in writing before anything is opened.
- From $95 diagnostic, credited to the repair
- 59 cities and neighborhoods covered
- OEM parts available on order
- In writing the price, before anything is opened
The short version
Where this figure comes from
A starting point for built-in appliances in South Florida, published so the number is not a mystery until somebody is standing in your kitchen.
Starts at
from $175
After a diagnostic from $95, which comes off the bill when you go ahead with the work.
or call (305) 306-2503
It is not
A quote for your unit
Exact cost
Confirmed after the on-site diagnostic
Warranty
On the labor we performed
What moves it
Why two of the same job cost different amounts
These apply at the same time and in both directions. Which of them is true of your kitchen is what the on-site diagnostic settles.
-
Oven or surface
An oven igniter is measured for current draw. Surface burners are electrodes and a spark module, and a module serving several burners fails as a group.
-
Whether there has been a spill
Persistent clicking after a spill is usually moisture or debris around the electrode, and drying and cleaning is the whole repair.
-
Which of the four badges it carries
GE, GE Profile, Café and Hotpoint share most of their engineering, so the part is often the same one — but not always the same price, and a component discontinued under one name is frequently current under another. That works in your favor more often than against it on an older machine.
-
How old the serial says it is
GE's serial number carries a two-letter date code, a letter for the month and a letter for the year, so the age of the appliance is known before anybody quotes anything. It is what decides whether a repair is an investment or a postponement, and we would rather have that conversation at the start.
-
Whether it is built in
A freestanding appliance rolls out. A built-in, a stacked wall oven or an over-the-range microwave is fixed into the kitchen, and the work is planned around the cabinetry. On this make most of the catalog is freestanding, which is why these figures sit below the built-in brands' in this fleet.
The work itself
What we actually do
The job behind the figure: what it involves, when a symptom points at it, and what we check first.
-
from $175 Gas range igniter and burner repair
GE range igniter replacement is measured with a meter rather than judged by eye: the igniter has to draw enough current to open the safety valve, and a weak one glows beautifully without ever opening it. A gas oven that will not light, or a surface burner that clicks and never catches. The commonest answer on the oven side is an igniter that still glows but no longer draws enough current to open the valve — which is why it looks like it is working and is not.
- A glowing igniter can still be a failed one
- Clicking burners are usually the electrode or moisture
- Measured with a meter, not judged by eye
In more detail
About GE gas range igniter and burner repair cost
Why this is a range and not a price
Every figure on this site is a starting point, and this one is from $175. What decides the number is which part it turns out to be and what the installation does to the time, and neither is known before somebody has looked. Publishing a firm figure without that would be guessing in public, and it is against the rules we run every site by.
What moves it on a GE specifically
Three things, and they are the reason this make sits below the built-in European brands in this market. GE is the largest appliance manufacturer in the United States by units in service, so its parts are stocked rather than ordered from a distributor — which is often the difference between one visit and two. Its four badges, GE, GE Profile, Café and Hotpoint, share most of their engineering, so a component discontinued under one is frequently current under another and older machines stay viable longer. And most of this catalog is freestanding rather than built into joinery, so the access that dominates a built-in repair usually does not apply.
The age, read off the plate before anything is quoted
GE’s serial number carries a two-letter date code — a letter for the month and a letter for the year — so we know how old the appliance is before naming a figure. That decides repair-or-replace more reliably than the symptom does: the same part is a sensible repair on a four-year-old machine and a poor one on a fourteen-year-old. Where the two are close, you get both numbers side by side.
What we do with the number
You get the scope and the figure in writing before anything is opened, and the diagnostic comes off the bill when you go ahead. If the honest answer is that the repair is not worth doing, you get that too — which costs us the job and is the only version of this advice worth having.
This article is based on:
- Official manufacturer documentation
- Internal repair procedures
- Technician repair history
- Company quality standards
Before you book
Questions about GE gas range igniter and burner repair cost
The igniter glows, so it cannot be the igniter.
It can, and it usually is. The igniter has to pull enough current to open the safety valve; a weak one glows beautifully and never opens it.
All the burners click at once.
That pattern points at the spark module rather than at four electrodes, which is one part instead of several.
Where we do it
Across Miami-Dade, Broward, and Palm Beach
Same terms everywhere we go: an on-site diagnostic first, the price agreed in writing, and the exact figure confirmed once we have seen the unit.
Neighborhoods people ask for by name